Press-Brakes

The Ermak NC series of press-brakes come with Elgo NC control over x-axis and y-axis. Available from 1.27m x 35T to 6.1m x 400T capacity.

The Ermak CNC HAP series of press-brake come with Cybelec DNC 60 or Delem ER70 contoller with 3-axis y1, y2 and x-axis. Available from 1.27m x 35T to 8.1m x 2000T capacity.

The Ermak CNC AP series of press-brake come with Cybelec Modeva 10 or Delem 69W contoller with 4-axis y1, y2, x and R-axis. Manual anti-deflection is also standard. Available from 1.27m x 35T to 8.1m x 2000T capacity.

The new generation high speed SAP series of press-brake comes with Cybelec Modeva 10 or Delem 69W contoller with 4-axis y1, y2, x and R-axis. Motorized anti-deflection is also standard. Available from 2.1m x 40T to 6.1m x 320T capacity.

The Ermak HGS swing beam series of guillotine are high performing and economic machines with modem design, strong steel weld construction frame and perfect cutting quality. Available dimensions are 2600, 3100, 4100 mm and capacities are 6 mm, 8 mm. Main frame and top beam are in box construction and highly resistant to twisting forces. Fast and precise blade gap adjustment system is placed on the right side of the machine. HGS Seriesguillotines are the best performers in their category with 18-20 strokes per minute in full length.

The Ermak HGD swing beam series of guillotine are designed for heavy duty cutting of sheets sheets 10 - 20mm thick. Strong monoblock steel weld construction frame retains its rigidity even working in maximum capacity, thus helps to provide a good quality and clean cut. Small cutting angle decreases twisting to a minimum in narrow sheet cutting.

The ERMAK HVR variable rake series of guillotine are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed. Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.